Single Spotlight – Distressed Brass Light- GU10

Single Spotlight – Distressed Brass Light – GU10

Stylish, practical, and wonderfully versatile, this distressed brass spotlight adds character while solving awkward lighting challenges with ease. Ideal for beams, alcoves, feature walls, and both wall or ceiling mounting, it delivers focused illumination exactly where you need it.

The distressed brass finish brings warmth and an authentic industrial feel to both contemporary and vintage-inspired interiors. Meanwhile, the adjustable flexible joint allows you to direct the light to suit your space, making it perfect for task lighting, ambient lighting, or highlighting architectural details and artwork.

Suitable for GU10 bulbs.

Proudly made in Yorkshire.

Product Dimensions Approx.

• Backplate diameter: 105 mm
• Backplate depth: 40 mm
• Shade length to flexible joint: 85 mm
• Shade diameter (open end): 75 mm
• Overall length: 160 mm

Fitting Instructions – P7 Crossbar Included

1. Ensure a qualified electrician carries out the installation.
2. Switch off the electricity supply at the mains before beginning installation.
3. Remove the existing ceiling rose and securely install the supplied crossbar.
4. Thread the cable through the new ceiling plate, then complete the terminal connections using a suitable connecting block (not supplied).
5. Once you complete the connections, lift the ceiling plate into position and secure it using the side screws and crossbar. Existing screws from the previous fitting may prove suitable. However, if you are fixing into masonry or concrete, use appropriate wall plugs.

Please note: We do not supply screws, as the correct type and length will depend on your ceiling construction and installation method.

1. Use LED GU10 lamps only to help prevent overheating. Please refer to the lamp manufacturer’s guidance for compatibility details.

Care Instructions

To clean the fitting, use a soft dry cloth. In addition, you may use a suitable glass cleaner for stubborn marks on glass surfaces. Avoid abrasive cleaning products on the metal finish.

For safety and peace of mind, always use a qualified electrician for installation.