Spotlight Antique Bronze GU10

Antique Bronze Spotlight – Shallow Wall Plate – GU10

Gorgeous and practical, our versatile antique bronze spotlight- wall light, is perfect for awkward lighting problems such as beams and alcoves as well as wall and ceiling mounting. In a lovely antique bronze and suitable GU10 Halogen bulbs, great for concentrated light, background light or highlighting. The flexible joint allows the angle of the lamp to be changed to suit your situation.

Made in Yorkshire.

Spotlight Antique Bronze GU10 Dimensions Approx:

Backplate 100mm diameter;Backplate Depth 15mm

Shade length to the flexible joint.85mm

Shade Diameter (open end) 75mm

Overall length 140mm

Always use a qualified electrician for any electrical work.

FITTING INSTRUCTIONS WITH P30 – NO CROSSBAR

This fitting should only be connected by a competent person, if in any doubt please employ a qualified electrician. 2. Switch off the electricity at the mains. 3. Remove the existing ceiling rose from the ceiling. 4. Thread the cable through the new ceiling plate then make the appropriate terminal connections using a connecting block (not supplied).  5. When all the connections have been completed, lift the ceiling plate to the ceiling and secure it with the side screws. The screws used in the previous rose may be suitable. Plugs will need to be used if fixing to concrete or masonry. NB. We do not supply screws as the type and length of screw required is dependent upon your type of ceiling or connector blocks. 6. Only use LED lamps with these types of fittings to ensure lamps do not overheat (see the label on the lamp itself for details). 7. To clean, use a dry, soft cloth, a glass cleaner may need to be used for more stubborn marks on the glass. Do not use abrasive cleaning agents on the metalwork.